E.1 The following tables give a set of specifications which are calculated to achieve compliance for a typical 126 sqm semi-detached house and 81sqm apartment. Compliance with this requirement could also be achieved by a number of other combinations of measures.

Table HL22A - Example A - Semi-detached dwelling with gas boiler for space heating and continuous mechanical extract ventilation - Extract from TGD L

Table HL22B - Example B - Semi-detached dwelling with gas boiler for space heating and natural ventilation with intermittent extract - Extract from TGD L

Table HL22C - Example C - Semi-detached dwelling with gas boiler for space heating and mechanical ventilation with heat recovery - Extract from TGD L

Table HL22D - Example D - Semi-detached dwelling with heat pumps for space heating and continuous mechanical extract ventilation - Extract from TGD L

Table HL22E - Example E - Mid floor apartment dwelling space heating-gas boiler and mechanical ventilation with heat recovery - Extract from TGD L

Table HL22F - Example F - Mid floor apartment dwelling space heating-heat pump and continuous mechanical extract ventilation - Extract from TGD L

E.2 The standardized primary energy consumption and CO2 emissions for space heating, water heating, ventilation and lighting for this dwelling, as calculated by DEAP, are given in Table E2, expressed per m2 of floor area per annum. The table shows that the calculated EPC complies with the MPEPC requirement of 0.30, and the CPC complies with the MPCPC requirement of 0.35

Table HL23 - Example dwellings - results - Extract from TGD L

Appendix E - Achieving compliance with respect to EPC and CPC